Machinery Lubrication Training

Machinery Lubrication

Yekta group, due to its very valuable experiences, especially teaching for more than 20 years, the company CEO and founder of Mr. Yekta , has successfully conducted many courses on industrial lubrication training, etc. in the 20 past years in public and private centers in the universities, industrial sections, petroleum ministry around of iran & Erbil ( iraqi kurdistan), Vienna , Singapore , Dubai , istanbul .

In addition to implementation, the lubrication and condition monitoring of industrial lubrication team has trained and prepared services for each of the relevant organizations. Including Oil Pipelines and Telecommunications Company, National Gas Company and .

The main part of lubrication training was lubrication of turbines with viscosity grades of lubricants ISO 32 , ISO 46 , ISO 68 , ISO 100 and hydraulic oils, industrial refractory lubricants and gear oil, which were separately trained and lubrication processes were performed well.

This section is done entirely with the recommendations of NORIA, ICML and STLE. The necessary request has been sent to represent these three institutions and now Naft Andish Yekta pte Company is waiting for their official response to act as their exclusive representative in Iran.

Therefore, due to the wait, no certificates or documents can be issued by this company at the moment.
Proper and standard training has highlighted the need to maintain the health and performance of heavy and light industry equipment, so that now large global organizations such as NORIA, ICML, STLE, AOCS are only teaching psychoanalysis with important topics and thus billions.

NORIA : Global Biggest Machinery Lubrication Training Corporation & ICML : Internation Council for Machinery Lubrication ( global training certification)

STLE : Society of Tribologists & Lubrication Engineers ( global experts ) ----- AOCS : American oil chemists society ( global scientists)

The dollar has saved savings in recent years in the advanced aviation, oil and gas and petrochemical industries of power plants, maritime transport and the world's largest automotive network.

Yekta group has also implemented applied lubrication courses in the Ministry of Oil of Iran, Iraqi Kurdistan, Istanbul and Singapore during the five years of close relations with the above-mentioned centers and membership in them academically.In proper lubrication, choosing the right lubricant for that industry is of particular importance.

The management of Yekta group is now one of the operational and practical organizers of the machinery lubrication industry in the country.

Understanding the overall health and well-being of your equipment can improve your profitability and provide a competitive edge. Lubrication management and oil analysis are being used by forward-thinking companies that are focused on getting the most out of their equipment.

Machinery lubrication training with YEKTA explains best practices used for lubrication and oil analysis and prepares attendees to take the MLT OR MLA, offered by the International Council for Machinery Lubrication (ICML).

Designed for those responsible for daily lubrication tasks, including oil changes, top-ups, greasing bearings, lubricant receiving and proper storage and care of lubricants as well as dispensing devices, this session will prepare you for the Machine.

The reliability of turbines is pivotal to the success of power generation facilities — a problem with the main turbine can cause outages and production delays. A study performed by General Electric revealed that about 20 percent of forced outages in power plants could be attributed to turbines, and 19 percent of these issues were connected to the lubricating oil system.

Because the continued operation of turbines relies on the performance of turbine oil, it is important to select the right turbine oils and monitor them closely for signs of degradation.

This whitepaper can help you better understand how to choose a turbine oil to fit your needs, goals, and application as well as how to care for that turbine oil from storage to service.

Topics Covered in This Whitepaper: Sludge & Varnish , Turbine Oil Degradation Methods , Thermal and Compressive Degradation , Electrostatic Discharge , Essential Turbine Oil Properties , Evaluating Turbine Oil Performance , Viscosity Testing , Oxidation Testing , Testing for Water , Acid Number Testing , Turbine Oil Cleanliness: Sampling and Levels , Responding to Contamination .

The main factors of disruption and deterioration of standard grading and quality of lubricating oil in industries & 12 very important cases of lubrication

We provide asset protection through our Oil Condition Monitoring service by helping customers achieve maximum machinery and lubricant efficiency. This also protects the environment by ensuring efficient engine operation reducing GHG emissions.

Through enhanced reliability users benefit from reduced operational and maintenance costs, improved equipment uptime, can drive maximum productivity from the machinery and its lubricant.

It is a proven loss prevention technique that can form a key part of any condition-based predictive maintenance programme. Scheduled testing of lubricating oil provides information on the condition of the equipment, detecting contamination, giving an early warning system enabling the operator to act, avoiding costly maintenance and lost productivity.

As you can see, the correct implementation of the lubrication program in the industry reduces the daily maintenance costs and increases the life of the parts.Oil Condition Monitoring (OCM) is a crucial element of any predictive maintenance schedule. OCM includes measuring, monitoring and analysing changes in lubricant and fuel oils for contamination and chemical content, and tracking degradation in oil quality from new to end-of-life.

One of a series of lubrication courses for petroleum

The Machine Lubricant Analyst I & II Certification is for personnel responsible for the daily activities associated with lubrication tasks and basic lubricant analysis for machine condition monitoring, including managing test results and performing simple diagnostics. For personnel responsible for the daily activities associated with lubrication tasks and basic lubricant analysis for machine condition monitoring, including managing test results and performing simple diagnostics.

This certification is optional and not included in cost of training. Candidates must have at least two years education (post-secondary) or on-the-job training in one or more of the following fields: machine lubrication, engineering, mechanical maintenance and/or maintenance trades in order to take the MLA I & II exam. Complete the certification exam application to register for the exam.

Our MLT I/MLA I courses is designed to educate attendees on a variety of topics in the field of machinery lubrication including lubricant selection, application, contamination control and oil analysis. This course is based on the ICML MLT I / MLA I body of knowledge and covers all subject matter included in the exam. The focus of the program is to create awareness of the important issues in lubrication and offer practical, effective solutions to the challenges facing today’s maintenance professionals.

Our instructors have decades of in-plant experience designing and implementing precision lubrication programs and we have trained thousands of maintenance professionals on the most effective methods for engineering a world-class program.

Our MLA II course is designed to educate attendees on a variety of topics in the field of machinery lubrication including lubricant selection, application, contamination control and oil analysis. This course is based on the ICML MLA II body of knowledge and covers all subject matter included in the exam.

The focus of the program is to create awareness of the important issues in lubrication and offer practical, effective solutions to the challenges facing today’s maintenance professionals.

NOTE : At present, we have formally requested extensive cooperation with NORIA and ICML for extensive training and application of machine lubrication engineering, and we are waiting for a license from these NORIA & ICML organizations to provide very comprehensive and international services to our customers in all industries.We will be happy to be able to use NORIA and ICML training services in the future.

SOURCES : more thanks from ICML , NORIA , STLE , AOCS & YEKTA GROUP EXPERIENCES

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------